Illuminated Face Fabrication

Custom Front-Lit
Channel Letters

ZYD is a custom channel letter sign manufacturer in Dalian, China. We fabricate front-lit LED channel letters with acrylic faces and formed metal returns to each project brief.

White front-lit channel letters illuminated on a workshop bench, with red illuminated letters behind

Workshop lighting check. All dimensions are customised to the approved project drawing.

Before you request a quote

Specify your illuminated letter set

Use these decisions to define the quotation. The approved drawing and written quote establish the final construction, supplied accessories and site work.

Minimum order

1 set

Design support

Free design by our designers

Typical production

7–15 days

Warranty

1 year

Confirm the production schedule with the approved drawings and order scope. Design review and transport time are scheduled separately from production.

Lighting effect

Front-lit letters illuminate the face. For rear glow, review the halo-lit alternative. Send daytime and night-time appearance references, face colour and preferred light colour; confirm the effect against the actual wall and artwork.

Materials and finish

State letter height, depth, face material, metal body and finish. Aluminum, stainless steel and coated-sheet routes should be compared against the application; identify exposed edges and brand colour references.

Fixing and wiring

Send a wall photo, substrate and installation height. Confirm individual fixing or raceway mounting, cable exits, access for maintenance and the installer’s fixing requirements before fabrication.

Power and supplied parts

Confirm destination supply voltage, power supply position and the specified LED circuit with the project team. Ask whether drivers, wiring information, mounting templates and fixings are included; on-site installation and local electrical connection are not included in ZYD supply.

From free design to drawing approval

  1. Send your logo or reference, approximate dimensions, quantity, site photographs and delivery destination. Unknown details can be discussed with our designers.
  2. Our designers prepare a free design for review. Check the artwork, dimensions, colours, lighting and proposed mounting arrangement with your project team.
  3. Confirm the final drawing and written supply scope before fabrication. For pylon signs, coordinate site-dependent structural and foundation interfaces with your local team.
  4. Agree the production schedule, packing and delivery arrangements for the approved order. Typical production takes 7–15 days; on-site installation is not included.

1-year warranty and after-sales contact

If an issue occurs, contact our team with the order reference, a description and clear photos or video. We will review the issue and discuss the appropriate next steps. Confirm warranty coverage and any parts, labour or transport arrangements in the order terms. On-site installation and local site work are not included.

Start with what you have

Send vector artwork if available, overall width and letter height, set quantity, finish and lighting preference, wall photos and ship-to city/country. Unknown details can be marked for review. Request fabrication, accessories, packing and freight as separate quote lines, with exclusions identified.

Get a channel letter quote

Workshop photographs

See the faces, depth and illumination before installation

These photographs show custom letter and logo sets during workshop preparation and lighting checks. Compare the unlit face appearance with the illuminated result, then specify the artwork and installation requirements for your own project.

Red dimensional channel letters laid out unlit in the workshop with wiring and power supplies nearby

Unlit face and letter depth

The unlit workshop view shows the face colour, dimensional returns and separate letter units.

Red and white front-lit channel letters illuminated during a workshop lighting check

Front illumination check

Red and white faces are illuminated on the workshop bench. Final brightness and appearance are reviewed for the installation setting.

Custom red illuminated logo beside dimensional lettering during a workshop check

Letters and a separate logo element

A shaped illuminated logo and individual lettering form one coordinated set. Logo geometry and letter count belong in the quotation brief.

Custom dimensions, specified from your artwork

Overall width, letter height, return depth, quantity, finish and mounting details are confirmed on the project drawing. These photographs are construction references, not a standard-size catalogue. Send approximate dimensions if the final size is still being decided.

Closed ZYD wooden packing crate with external reinforcement and a raised base in the workshop

From design to dispatch

Planning, fabrication, packing and shipping

ZYD can plan and design the signage, manufacture the approved sign package, and arrange packing and transport. EXW, FOB, CIF and DDP options are available by quotation for the agreed destination or port.

On-site installation is not included. Arrange the local installer, foundation works, lifting and electrical connection with your project team.

View packing photos and delivery scope
Front-lit channel letters: the short answer

A front-lit channel letter is built so that the illuminated surface is the face: the letter body holds the LED modules and the light leaves through the acrylic face, which makes the letter itself the bright element. Choose it when the letters have to read as branded signs in daylight and at night, rather than throwing light onto the wall behind them.

How are front-lit channel letters built?

The letter is formed from sheet metal to create a body with a return, the LED modules are mounted inside that return and wired back to a power supply, and a translucent acrylic face is fitted and trimmed. The face material, the depth of the return and the module spacing are set together, because those three decide whether the face reads evenly or shows the light source. Nothing goes to production before the shop drawing records them.

Which materials suit outdoor front-lit letters?

Letter bodies for exterior work are usually 304 stainless steel, aluminum or coated sheet, with the face in translucent acrylic and the trim in a matching or contrasting metal finish. The material route and the fixing detail are chosen against the exposure of the site, so a coastal or heavily weathered location is specified differently from a sheltered one. The material comparison covers how the sheet routes differ.

What information is needed for a front-lit letter quotation?

A comparable quotation is built from vector artwork, the letter height and overall run, the quantity, the wall material, the mounting height and the finish direction, with the face material stated because it changes the construction. Site photos help confirm the standoff and the wiring route. The cost guide sets out how each of those inputs moves the price.

How are illumination and service access specified?

Lighting is specified as part of the build rather than added afterwards: module type, spacing and the power supply position are listed on the drawing, and the face or a service panel is detailed so a letter can be opened without taking the whole sign off the wall. How the face, return and trim materials are reviewed together is covered in the material guide.

Specifications with selection logic

Each item is a decision input for a front-lit letter. Confirm the face, the return depth and the mounting route before production.

Letter face

  • • Translucent acrylic, the illuminated surface
  • • Face material chosen against the required light spread
  • • Trim fitted around the face edge

Letter body

  • • 304 stainless steel for exposed outdoor letters
  • • Aluminum for lighter letter bodies
  • • Coated sheet where a painted finish is specified

Interior illumination

  • • LED modules mounted on the interior of the return
  • • Module spacing set for an even face
  • • Power supplies selected for the project specification

Mounting & access

  • • Raceway or individual bracket mounting
  • • Wiring route and service access agreed before fabrication
  • • Face or service panel detailed for single-letter service

Factory Advantage

Direct manufacturing from our 20,000sqm base in Dalian, established in 2006, keeps fabrication and finishing under one quality-control process.

DDP Shipping by Quotation
MOQ: 1 set
Production: 7–15 days
Related Reading

Two illuminated constructions, one decision

Front-lit letters light the face; halo-lit (rear-glow) letters leave the face dark and light the wall behind it. The two are often specified for different parts of the same project — a bright front-lit facade and a restrained rear-glow entrance — and reading them side by side is usually how that split is settled. The halo-lit (rear-glow) letters page shows the other construction.

Once the construction is fixed, the remaining questions are commercial and procedural: what the price is built from, how a low bid can pass acceptance while missing the scope, and what the production stages are between drawing and packing. The low-bid tender guide and the manufacturing process guide cover those, and the contact form is where a front-lit letter set gets reviewed.

Frequently asked questions

Do you offer free design and drawing confirmation?

Yes. Our designers provide free design support. Share your artwork or reference, dimensions, quantity and site information. Review the design and confirm the final drawing, lighting, finish and supply scope before fabrication. Site-dependent interfaces must be coordinated with the local project team.

What warranty and after-sales support do you provide?

The warranty is 1 year. Contact our team with the order reference, issue description and photos or video so we can review the problem and discuss the next steps. Warranty coverage and any parts, labour or transport arrangements should be confirmed in the order terms. On-site installation is not included.

What is a front-lit channel letter?

A front-lit channel letter is a fabricated letter with a translucent face that is lit from inside the letter body. The light passes through the face, so the letter itself glows while the wall behind it stays dark. That is the opposite of a halo-lit (rear-glow) letter, where the face stays unlit and the light is thrown back onto the wall.

How is the illumination built inside the letter?

The letter body carries LED modules mounted on the interior of the return and wired back to a remote power supply. Module spacing and the depth of the return are set against the letter size and the face material, so the face reads evenly instead of in bright patches. The layout is drawn on the shop drawing that precedes production.

What are the face, return and trim made from?

The face is normally translucent acrylic, and the return and the trim are formed from sheet metal — aluminum or stainless steel are the usual routes, with coated sheet where a painted finish is specified. The trim is the visible edge around the face, so its material and finish are a design decision as much as a construction one.

Which finishes can be specified for the letter body?

Brushed or mirror stainless steel are common on architectural work, and a letter body can be powder coated in specified RAL colors. The return is the part seen from the side, so its finish is usually chosen against the facade. Face material and body finish are confirmed together on the shop drawing.

How are front-lit letters mounted to a wall?

Letters are mounted either on a raceway or on individual brackets. A raceway carries the wiring and gives a consistent standoff, while individual mounting suits letter sets that follow a curve or an irregular elevation. Which route is used depends on how the wiring has to reach each letter and how flat the wall is.

Can front-lit letters be used outdoors or in coastal locations?

Outdoor letter sets are a common request, and the material route and fixing detail are chosen with the exposure in mind. A coastal or heavily exposed site calls for a different specification than a sheltered one, so the route is confirmed per project rather than assumed from the letter type. Share the location and the wall condition with the brief.

How is brightness uniformity controlled across a letter?

Uniformity comes from the module spacing, the depth of the return and the face material together. A deeper return with closer module spacing gives a more even face, while a shallow return can show the light source as a hot spot. The intended effect is confirmed before fabrication.

Can a single module or one letter be serviced on site?

Service access is planned while the letter is designed. Letters are usually built so the face or a service panel can be opened without removing the whole sign, and the power supply is positioned where it can be reached. Access, wiring route and power supply positions are recorded on the drawing set.

What information is needed for a front-lit letter quotation?

A comparable quotation needs the artwork in vector form, the letter height, the overall run and the quantity, plus the wall material, the mounting height and the finish direction. State the face material as well, because it changes the construction. Send those details with the brief and the engineering review follows.

What are the MOQ and the lead time for front-lit letters?

The MOQ is 1 set. Typical production lead time is 7–15 days. Confirm the production schedule with the approved drawings and order scope; design review and transport are scheduled separately.

Planning front-lit letters?

Send the artwork, letter height, quantity, wall material and face direction for a project-specific review.